Automotive calculators

Tire Size Calculator

Updated Nov 17, 2026 By Infinity Calculator Formulas Sources
Rate

Don't know your tire size? Select your vehicle.

The list covers a small set of 2023 and 2024 models. Check the size it fills in against the tire information placard on the driver's side door edge or door post.

Metric
Inch
265/70R17

1Tire 1 (Original)
225/60R16
2Tire 2 (New)
245/45R18

Tire Size Overall Diameter (in) Section Width (in) Sidewall (in) Circumference (in) Rev/Mile Rim (in)

0 tire sizes shown


Introduction

The Tire Size Calculator helps you understand what your tire numbers mean and compare different tire sizes for your car. Tire sizes can be confusing. They use a mix of millimeters, percentages, and inches all in one code printed on the side of your tire. This tool breaks those numbers down so you can see the actual width, sidewall height, and overall diameter of any tire. This calculator makes it simple to shop for new tires, switch to a bigger or smaller size, or check what fits your vehicle. Just enter your tire size, and it calculates the measurements for you.

How to Use Our Tire Size Calculator

Enter your tire measurements to get full tire specifications, compare two tire sizes side by side, or browse a reference chart of tire sizes. The calculator gives you overall diameter, sidewall height, circumference, revolutions per mile, speedometer correction, and a visual tire profile.

Vehicle Selection (Optional): If you don't know your tire size, pick your vehicle's year, make, model, and trim from the dropdown menus. The list covers a small set of 2023 and 2024 models, and the calculator fills in a tire size for the trim you pick. Check it against the tire information placard on the driver's side door edge or door post, which lists the recommended tire size.1

Format Toggle (Metric or Inch): Choose between metric format (like 265/70R17) or inch format (like 31.6x10.4R17) depending on how your tire size is listed.

Section Width: Enter the width of your tire in millimeters (metric mode) or inches (inch mode). This is the first number in a standard tire size. For example, in 265/70R17 the width is 265 mm.

Aspect Ratio: Enter the aspect ratio of your tire, which is the sidewall height shown as a percentage of the tire's width. In 265/70R17, the aspect ratio is 70. This field appears only in metric mode.

Overall Diameter (Inch Mode Only): Enter the total height of the tire from top to bottom in inches. This replaces the aspect ratio when you use inch format.

Rim Diameter: Enter the diameter of your wheel rim in inches. This is the last number in a tire size. In 265/70R17, the rim size is 17 inches.

Tire Comparison Tab: Enter the section width, aspect ratio, and rim diameter for both your original tire (Tire 1) and your new tire (Tire 2). The calculator will show a visual size comparison, bar charts, a side-by-side specs table, and speedometer correction data so you can see exactly how the two sizes differ.

Reference Charts Tab: Use the rim size filter, diameter range filter, or search bar to browse a chart of tire sizes along with their full specifications. The chart is built from common widths, aspect ratios and rim sizes, so it may also list some combinations that are not made. This helps you find and compare tire sizes quickly without entering numbers one at a time.

Understanding Tire Sizes

Every tire has a set of numbers printed on its sidewall that tells you exactly how big it is. A typical tire size looks like 265/70R17. Each part of this code means something specific. The first number is the section width: how wide the tire is in millimeters from one sidewall edge to the other.1 The second number is the aspect ratio, the tire's sidewall height compared with its width.1 The "R" stands for radial construction, and the last number is the rim diameter in inches.1 So a 265/70R17 tire is 265 mm wide, has an aspect ratio of 70, and fits a 17-inch rim. Together, these three numbers define the tire's overall size and shape.

How Tire Dimensions Are Calculated

To find the overall diameter of a tire, you need to combine the rim size with the sidewall height. The sidewall height is found by multiplying the section width by the aspect ratio. For example, a 265/70R17 tire has a sidewall height of 265 × 0.70 = 185.5 mm. Since there are two sidewalls (top and bottom), you add both to the rim diameter: (17 inches × 25.4 mm) + (2 × 185.5 mm) = 802.8 mm, or about 31.6 inches. From the overall diameter, you can then figure out the circumference (the distance the tire covers in one full rotation) and the revolutions per mile, which is how many times the tire spins to travel one mile.

Why Tire Size Matters

Changing your tire size affects more than just how your car looks. A taller tire covers more ground per rotation, which means your speedometer will read lower than your actual speed. A shorter tire does the opposite: your speedometer will show a higher number than you are really going. For safety, buy tires that are the same size as your vehicle's original tires or another size the vehicle manufacturer recommends.1 If you do change size, a common fitment guideline is to stay within 3% of your original tire diameter to keep your speedometer accurate.2 A size change can also keep safety systems such as anti-lock brakes and stability control from working properly.2 Traction control can be affected as well. You can use our Percent Change Calculator to quickly determine the percentage difference between your original and new tire diameters.

Wider tires can give you more grip because they put more rubber on the road.2 However, wider tires can also increase rolling resistance, which may lower your fuel economy slightly.3 Tires with a shorter sidewall (lower aspect ratio) tend to feel more responsive during steering but give a firmer ride.2 Tires with taller sidewalls absorb bumps better and are more comfortable on rough roads.2

If you're also looking at window modifications alongside new tires, our Tint Calculator can help you figure out the right window tint levels for your vehicle.

Comparing Two Tire Sizes

When you are thinking about switching to a different tire size, it is important to compare the old and new sizes side by side. Key things to check include the difference in overall diameter, section width, and revolutions per mile. A bigger diameter means your car sits slightly higher and your odometer will under-count the miles you drive. A smaller diameter does the opposite. You should also make sure the new tire fits your wheel well and does not rub against fenders or suspension parts when turning or going over bumps. Checking the diameter difference percentage tells you how far off your speedometer will be with the new tires.

Metric vs. Inch Tire Sizing

Most passenger cars and trucks use the metric system for tire sizes (like 225/60R16). However, some off-road and light truck tires use inch-based sizing (like 31x10.5R15), where the first number is the overall diameter in inches and the second is the section width in inches. Both formats describe the same physical measurements. They just express them differently. You can convert between the two formats using simple math, or you can use the calculator above to handle the conversion automatically.


Formulas used

Sidewall Height
H_{\text{sidewall}} = \frac{\text{Aspect Ratio}}{100} \times W
Overall Diameter
D = (R \times 25.4) + 2\,H_{\text{sidewall}}
Circumference
C = \pi \times D
Revolutions per Mile
\text{Rev/Mile} = \frac{1{,}609{,}344}{C_{\text{mm}}}
Revolutions per Kilometer
\text{Rev/km} = \frac{1{,}000{,}000}{C_{\text{mm}}}
Speedometer Correction (Actual Speed)
V_{\text{actual}} = V_{\text{speedo}} \times \frac{C_{\text{new}}}{C_{\text{original}}}
Diameter Difference Percentage
\Delta D\% = \frac{D_{2} - D_{1}}{D_{1}} \times 100

Frequently asked questions

How do I find my current tire size?

Look at the sidewall of your tire. You will see a code like 225/60R16 printed on it. You can also check the tire information placard on the driver's side door edge or door post, which lists the recommended tire size.1

How much bigger can I go without causing problems?

For safety, buy tires that are the same size as your vehicle's original tires or another size the vehicle manufacturer recommends, and ask a tire dealer if you are unsure.1 If you do change size, a common fitment guideline is to stay within 3% of your original tire diameter.2 Going beyond that can throw off your speedometer, odometer, and safety systems like ABS and stability control.2 Traction control can be affected as well. Tires that are too big can also rub against your fenders or suspension when you turn.2

Will changing tire size affect my speedometer?

Yes. A taller tire makes your speedometer read lower than your actual speed. A shorter tire makes it read higher. The reading is off by about the same percentage as the change in overall diameter, so a tire 3% taller makes the speedometer read about 3% below your actual speed.

What is sidewall height and why does it matter?

Sidewall height is the distance from the rim to the outer edge of the tire. It is calculated by multiplying the tire width by the aspect ratio. A taller sidewall gives a softer, more comfortable ride. A shorter sidewall gives sharper handling but a firmer ride.2 Sidewall height also affects your overall tire diameter.

What are revolutions per mile?

Revolutions per mile tells you how many times your tire spins to travel one mile. A smaller tire has more revolutions per mile because it covers less ground per spin. A larger tire has fewer revolutions per mile. This number affects your speedometer accuracy and odometer readings.

Can I put a different rim size on my car?

Yes, but a new wheel size means buying new tires to match the new wheel diameter.1 To keep the overall diameter close to the original, the new tire needs a lower aspect ratio as the wheel gets bigger. This is called plus sizing.2 For example, if you go from a 16-inch rim to an 18-inch rim, you need a tire with a shorter sidewall so the total diameter stays about the same. Use the comparison tab to check this. Choose a tire size your vehicle's manufacturer recommends, and ask a tire dealer if you are unsure.1

What is the difference between metric and inch tire sizes?

Metric sizes like 265/70R17 list width in millimeters, aspect ratio as a percentage, and rim size in inches. Inch sizes like 31.6x10.4R17 list overall diameter first, then width, both in inches, followed by rim size. They describe the same tire, just in different formats. This calculator handles both.

Does a wider tire give better traction?

Generally, yes. A wider tire puts more rubber on the road, which can mean better grip and handling.2 However, wider tires can also increase rolling resistance, which may slightly reduce fuel economy.3 They can also be more prone to hydroplaning on wet roads.

How does tire size affect fuel economy?

Wider tires carry more tread rubber, and more rubber means more rolling resistance, which can lower your gas mileage slightly.3 Narrower tires tend to be more fuel-efficient. For tires of the same construction, a larger overall diameter tends to lower rolling resistance a little.3 The difference is usually small (around 1 to 3 percent), but it adds up over time.

Will my odometer be wrong with different size tires?

Yes. Your odometer counts wheel rotations to measure distance. A larger tire covers more ground per rotation, so your odometer will under-count your actual miles. A smaller tire will make it over-count. Staying within 3% of your stock tire diameter keeps the error small.2

What is aspect ratio?

Aspect ratio is the height of the sidewall as a percentage of the tire's width.1 An aspect ratio of 70 means the sidewall is 70% as tall as the tire is wide. A lower aspect ratio means a shorter, sportier sidewall. A higher aspect ratio means a taller, more cushioned sidewall.2


Sources

  1. Tire Safety: Everything Rides On It (DOT HS 809 361). National Highway Traffic Safety Administration. 2001;pp. 2 and 9-10 (Finding your vehicle's recommended tire pressure; tire sidewall markings). Accessed September 29, 2026.
  2. Tire Upgrade Guide for Enhanced Vehicle Performance. BFGoodrich Canada. plus-sizing; FAQ: overall diameter within roughly 3 percent, handling and ride, what can go wrong. Accessed November 17, 2026.
  3. Gent AN, Walter JD (eds.). The Pneumatic Tire (DOT HS 810 561). National Highway Traffic Safety Administration. 2006;Ch. 12, Rolling Resistance, pp. 501-502 (tread width and tire mass; tire outer diameter). Accessed November 17, 2026.